Self-Regulating Heat Cable, Heat Trace Thermon

Self-Regulating Heating Cable HSX™ Sales agent VietNam, Laos, Cambodia

Self-Regulating Heating Cable HSX™

Self-Regulating Heating Cable HSX, the heart of Thermon’s WarmTraceTM system, are specifically designed to maintain hot water supply piping at desired nominal maintenance temperatures. With 14 AWG bus wires (larger than any other system available), HSX can reduce the number of circuits required to install an electric heat-traced system.

A WarmTrace system replaces the complex recirculation network of return pipes, circulating pumps and balancing valves. For each hot water supply line, simply match the hot water maintenance temperature with the corresponding color-coded cable and insulate per the design guide.

HSX self-regulating cable automatically maintains desired water temperatures. Changes in pipe diameters, flow rates and use patterns will not affect the design. Even variations in ambient or water temperature are compensated for as the cable adjusts its heat output along the entire length of a heat-traced pipe.

Self-Regulating Heating Cable HSX™ Sales agent VietNam, Laos, Cambodia
Self-Regulating Heating Cable HSX™ Sales agent VietNam, Laos, Cambodia

EASY TO DESIGN

A WarmTrace system replaces the complex recirculation network of return pipes, circulating pumps and balancing valves. For each hot water supply line, simply match the hot water maintenance temperature with the corresponding color-coded trace heater and insulate per the design guide.
HSX self-regulating heat trace automatically maintains desired water temperatures. Changes in pipe diameters, flow rates and use patterns will not affect the design. Even variations in ambient or water temperature are compensated for as the trace heater adjusts its heat output along the entire length of a heat-traced pipe.

EASY TO INSTALL

HSX heat tracing is cut to length and installed directly on the supply piping under conventional thermal insulation with ordinary hand tools. Kits for power connection, end termination and splicing, plus other accessories, are designed for quick and easy installation. Increased circuit lengths with HSX mean less circuits to fabricate and fewer total circuits.

CHARACTERISTICS

  1. 1.9 mm2
    (14 AWG) Nickel-Plated Copper Bus Wire
  2. E-Beam Cross-Linked Polyolefin Semiconductive
    Heating Matrix
  3. E-Beam Cross-Linked Polyolefin Primary
    Dielectric Insulation
  4. Aluminized Mylar Foil
  5. Tinned Copper Metallic Braid
  6. Polyolefin Outer jacket

RATINGS

Supply voltages …………………………………………………………..208 Vac
Minimum bend radius
@ -15°C (5°F)………………………………………………..10 mm (0.38”)
@ -51°C (-60°F)……………………………………………. 32 mm (1.25”)
30 mA Ground-Fault Protection Required 1

ECONOMICAL TO OPERATE AND MAINTAIN

A WarmTrace system replaces recirculation and eliminates the costs of continuously operating pumps, deliberately overheating the water and maintaining a recirculation system. Potential water savings can also be realized since the heat tracing can be installed up to the point of use—no waiting for hot water!

COMPONENTS

Thermon offers system accessories designed specifically for rapid, trouble-free installation of Thermon heat tracing. All trace heaters require a connection kit to comply with approval requirements. Information on accessories to complete a heater circuit installation can be found in the WarmTrace Systems Accessories product specification sheet (Form CPD1006).

datasheet: Self-Regulating Heating Cable HSX™

What is Heat Tracing?

Contact

  • Email: Hung.tran@wili.com.vn
  • WhatAPP: 0903710753

You may also like...

Popular Articles...