Table of Contents
Parallel Constant Watt Heating Cable FP™
Freeze Protection or Process Temperature Maintenance FP parallel resistance constant watt heating cables are designed to provide freeze protection or process temperature maintenance to piping, tanks and equipment. The parallel resistance configuration allows the cable to be cut to length and terminated in the field with easy-to-use Thermon supplied kits.
Parallel Constant Watt Heating Cable FP provide consistent and reliable heat outputs regardless of circuit length. Because FP cables are not subject to the inrush current associated with self-regulating heating cables, the need for oversizing power distribution equipment is eliminated.
RATINGS
Available watt densities ………………………… 2.5, 5, 10 w/ft
(8, 16, 33 w/m)
Supply voltages ………………………. 120/240 Vac nominal 1
Max. maintenance temperature……………….150°F (65°C)
Max. continuous exposure temperature
Power-off………………………………………..400°F (204°C)
Minimum installation temperature…………… -76°F (-60°C)
Minimum bend radius
@ 5°F (-15°C) ………………………………… 0.38” (10 mm)
@ -76°F (-60°C)……………………………….. .75” (19 mm)
T-rating 2
Based on stabilized design 3 ………………………T3 to T6
CONSTRUCTION
1 Copper bus wires (12 AWG)
2 Nichrome heating element
3 Heater bus connection (not shown)
4 Fiberglass overlay
5 Fluoropolymer dielectric Insulation
6 Tinned copper braid
7 Fluoropolymer overjacket provides additional protection
for cable and braid where exposure to chemicals or
corrosives is expected.
Datasheet: Parallel Constant Watt Heating Cable FP™
Contact
- Email: Hung.tran@wili.com.vn
- WhatAPP: 0903710753